Posts for tag: orthodontic treatment
Moving teeth through orthodontics may involve more than simply wearing braces. There are many bite conditions that require extra measures before, during or after traditional orthodontic treatment to improve the outcome.
One such measure is extracting one or more teeth. Whether or not we should will depend on the causes behind a patient's poor dental bite.
Here, then, are 4 situations where tooth extraction before orthodontics might be necessary.
Crowding. This happens when the jaw isn't large enough to accommodate all the teeth coming in. As a result, later erupting teeth could erupt out of position. We can often prevent this in younger children with space maintainers or a palatal expander, a device which helps widen the jaw. Where crowding has already occurred, though, it may be necessary to remove selected teeth first to open up jaw space for desired tooth movement.
Impacted teeth. Sometimes an incoming tooth becomes blocked and remains partially or fully submerged beneath the gums. Special orthodontic hardware can often be used to pull an impacted tooth down where it should be, but not always. It may be better to remove the impacted tooth completely, as well as its matching tooth on the other side of the jaw to maintain smile balance before orthodontically correcting the bite.
Front teeth protrusion. This bite problem involves front teeth that stick out at a more horizontal angle. Orthodontics can return the teeth to their proper alignment, but other teeth may be blocking that movement. To open up space for movement, it may be necessary to remove one or more of these obstructing teeth.
Congenitally missing teeth. The absence of permanent teeth that failed to develop can disrupt dental appearance and function, especially if they're near the front of the mouth. They're often replaced with a dental implant or other type of restoration. If only one tooth is missing, though, another option would be to remove the similar tooth on the other side of the jaw, and then close any resulting gaps with braces.
Extracting teeth in these and other situations can help improve the chances of a successful orthodontic outcome. The key is to accurately assess the bite condition and plan accordingly.
If you would like more information on orthodontic options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Teeth for Orthodontic Treatment.”
The movie Bohemian Rhapsody celebrates the iconic rock band Queen and its legendary lead vocalist, Freddie Mercury. But when we see pictures of the flamboyant singer, many fans both old and new may wonder—what made Freddie’s toothy smile look the way it did? Here’s the answer: The singer was born with four extra teeth at the back of his mouth, which caused his front teeth to be pushed forward, giving him a noticeable overbite.
The presence of extra teeth—more than 20 primary (baby) teeth or 32 adult teeth—is a relatively rare condition called hyperdontia. Sometimes this condition causes no trouble, and an extra tooth (or two) isn’t even recognized until the person has an oral examination. In other situations, hyperdontia can create problems in the mouth such as crowding, malocclusion (bad bite) and periodontal disease. That’s when treatment may be recommended.
Exactly what kind of treatment is needed? There’s a different answer for each individual, but in many cases the problem can be successfully resolved with tooth extraction (removal) and orthodontic treatment (such as braces). Some people may be concerned about having teeth removed, whether it’s for this problem or another issue. But in skilled hands, this procedure is routine and relatively painless.
Teeth aren’t set rigidly in the jawbone like posts in cement—they are actually held in place dynamically by a fibrous membrane called the periodontal ligament. With careful manipulation of the tooth, these fibers can be dislodged and the tooth can be easily extracted. Of course, you won’t feel this happening because extraction is done under anesthesia (often via a numbing shot). In addition, you may be given a sedative or anti-anxiety medication to help you relax during the procedure.
After extraction, some bone grafting material may be placed in the tooth socket and gauze may be applied to control bleeding; sutures (stitches) are sometimes used as well. You’ll receive instructions on medication and post-extraction care before you go home. While you will probably feel discomfort in the area right after the procedure, in a week or so the healing process will be well underway.
Sometimes, dental problems like hyperdontia need immediate treatment because they can negatively affect your overall health; at other times, the issue may be mainly cosmetic. Freddie Mercury declined treatment because he was afraid dental work might interfere with his vocal range. But the decision to change the way your smile looks is up to you; after an examination, we can help you determine what treatment options are appropriate for your own situation.
If you have questions about tooth extraction or orthodontics, please contact our office or schedule a consultation. You can read more in the Dear Doctor magazine articles “Simple Tooth Extraction” and “The Magic of Orthodontics.”
Sometimes you need only a single solution to improve your smile: teeth whitening to brighten stained teeth; porcelain veneers or crowns to mask dental flaws; or a life-like dental implant to replace a missing tooth. But not all dental situations are that simple and sometimes require a combination of treatments.
A case in point: restoring a missing tooth within a poor bite. The absent tooth itself may be the cause of the bite problem if it’s been missing for some time: The nearby teeth tend to move or “drift” into the empty space, leaving no room for implant placement.
When this happens, you’ll first need orthodontic treatment to correct the bite problem. Not only will this open the space for the implant, it also comes with its own benefits. It obviously improves your smile appearance—but straighter teeth are also easier to keep clean of bacterial plaque, which reduces your disease risk. You may also experience better digestion after your teeth are properly aligned and able to function as they should during eating.
The traditional way to improve a bite is through metal braces. But there are some downsides: For one, braces can make it difficult to keep teeth adequately clean, making wearers more susceptible to tooth decay and gum disease. Braces are also quite visible and can detract from a person’s appearance (even more so if a missing tooth is involved).
Unless your situation requires braces, you can choose clear aligners as an alternative. These clear, computer-generated plastic trays are worn in sequence to gradually move teeth to their desired positions. Unlike braces, you can remove aligners for eating, cleaning or rare special occasions. And, they’re barely noticeable to others.
If you also have a missing tooth, you can have a temporary prosthetic (“false”) tooth built into your aligner trays. In this way you can still enhance your smile while undergoing aligner treatment.
Once your bite has been corrected, we can then proceed with restoring your missing tooth permanently with a dental implant. Although orthodontics adds to the time and expense of restoration, its often necessary to achieve the best result. Your future smile will be the better for it.
Every year many parents learn their “tweenager” or teenager needs their bite corrected, often with specialized orthodontics. Imagine, though, if these families could go back in time to when their child’s poor bite was just developing to stop or slow it from forming.
Time travel may still be science fiction, but the approach suggested isn’t. It’s called interceptive orthodontics, a group of techniques and procedures performed during the early stages of jaw development. The focus is usually on getting abnormal jaw growth back on track, enough so that a poor bite won’t form.
The upper jaw, for example, may be growing too narrow, reducing the amount of available space for tooth eruption. If it isn’t corrected, teeth can erupt out of position. To correct it, an orthodontist places a palatal expander in the roof of the child’s mouth (palate). The appliance applies gentle pressure against the inside of the teeth, which stimulates the jaws to develop wider.
The expander works because of a separation in the bones at the center of the palate, which later fuse around puberty. The pressure applied from the expander keeps this gap slightly open; the body then continues to fill the widening expansion with bone, enough over time to widen the jaw. If you wait until puberty, the gap has already fused, and it would have to be reopened surgically to use this technique. Ideally, then, a palatal expander should be employed at a young age.
Not all interceptive techniques are this extensive—some, like a space maintainer, are quite simple. If a primary (baby) tooth is lost prematurely, teeth next to the empty space tend to drift into it and cause the intended permanent tooth to erupt out of place due to a lack of space. To prevent this an orthodontist places a small wire loop within the space to prevent other teeth from moving into it.
These are but two examples of the many methods for stopping or slowing a developing bite problem. To achieve the best outcome, they need to be well-timed. Be sure, then, to have your child undergo an orthodontic evaluation around age 6. If an interceptive orthodontic approach is needed, it could eliminate the need for more extensive—and expensive—treatment later.
Applying braces or clear aligners to move misaligned teeth is only part of an orthodontist's overall mission to eliminate poor bites (malocclusions). Sometimes a malocclusion isn't caused by the teeth at all—the size of the jaw is the problem!
One type in particular, a cross-bite, often happens because the upper jaw has developed too narrowly. As a result, many of the upper teeth fit inside the lower, the opposite of normal. But a tool called a palatal expander can alleviate the problem if it's applied at an early enough age.
The device works because the upper jawbone initially forms as two halves that fit together along a center line in the roof of the mouth (the palate) running from the back of the mouth to the front. These two bone halves remain separate during childhood to facilitate jaw growth, but eventually fuse around puberty.
Consisting of two sets of wire arms joined together by a hinge mechanism in the middle, the expander device is positioned up against the palate. The orthodontist extends each arm to press against the inside of the back teeth, then adds more outward pressure by turning the mechanism in the middle with a small key. During wear, the patient or caregiver will turn the mechanism in the same way to keep up the pressure on the two sides of the jaw.
This continual pressure keeps the two bones moving away from each other and maintaining a center gap between them. In response, more bone forms on the two halves to fill the gap. In time, the newly formed bone should widen the jaw enough to correct any developing malocclusion.
Timing is everything with a palatal expander—if not used before the jaw bones fuse, the patient will need a surgical procedure to separate the bones to pursue treatment. To catch the problem early enough, children should have an orthodontic evaluation on or before they turn six. An orthodontist may be able to identify this or other emerging bite problems and intervene before it becomes worse. Taking this approach can help save you and your child more expensive orthodontic treatment down the road.
If you would like more information on correcting poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”